Volume | 1L |
---|---|
Particles | Final finishing |
Viscosity | 4 |
Fluid color | Grey |
Characteristics | Non-silicone/wax-free |
Abrasive particle size (microns) |
0.3 through 0.5μ |
- FE News»
- PPS News»
- Oct. 02, 2023
- [News Release R-1018]Compound that achieves a genuine finish Full Renewal of “KATANA” Series
- Jun. 27, 2023
- [News Release] A final finishing compound that achieves a beautiful wet gloss. "KATANA DARK-SHOT" is Released.
- May. 22, 2023
- [News Release] Full renewal of buffing pad category Brand integrated into HAYABUSA
- Apr. 12, 2023
- Announcement of Office Relocation
- Mar. 09, 2023
- [News Release] Wide Range Compound That Focuses on Initial Cutting Process "KATANA META-SHOT" is Released.
PX MASTER PRO with menzerna
PX MASTER PRO is based on a proven formula used on the manufacturing lines of Mercedes and other automakers in Germany to efficiently achieve a delicate finish. The proportion of ultrafine alumina particles (of the same type used in PX95F PRO) has been increased by 5% to further enhance performance for initial polishing.
In addition, the particles are only 0.3 to 0.5μ in diameter, making it possible to achieve a mirror finish with no holograms, even on dark colored vehicles, by using this compound for the full process.
As you polish, the bonded alumina particles break down. This effect can be facilitated by using a memory foam buffing pad, allowing you to achieve both the cutting power needed for initial polishing and a smooth final finish with one compound. If used with a buffing pad, PM7 Dark can be used for the finish.
In addition, the particles are only 0.3 to 0.5μ in diameter, making it possible to achieve a mirror finish with no holograms, even on dark colored vehicles, by using this compound for the full process.
As you polish, the bonded alumina particles break down. This effect can be facilitated by using a memory foam buffing pad, allowing you to achieve both the cutting power needed for initial polishing and a smooth final finish with one compound. If used with a buffing pad, PM7 Dark can be used for the finish.