| Specifications | Double layer bucket |
|---|---|
| Volume | 11L |
| Size | Height 250mm x bottom area 215φ |
- FE News»
- PPS News»
- Apr. 15, 2024
- Holiday Closing Notice [Spring 2024]
- Oct. 02, 2023
- [News Release R-1018]Compound that achieves a genuine finish Full Renewal of “KATANA” Series
- Jun. 27, 2023
- [News Release] A final finishing compound that achieves a beautiful wet gloss. "KATANA DARK-SHOT" is Released.
- May. 22, 2023
- [News Release] Full renewal of buffing pad category Brand integrated into HAYABUSA
- Apr. 12, 2023
- Announcement of Office Relocation
Duplex Bucket
Two layers of buckets you can use
These work buckets come as a set with an inner and an outer bucket. Leaving a sponge, sandpaper, or cloth in the buckets when filled with water will allow any fine dust produced during wet sanding to pass through the mesh in the bottom of the inner bucket and precipitate to the bottom. Simply remove the inner bucket to quickly and easily throw away the dirty water.
These work buckets come as a set with an inner and an outer bucket. Leaving a sponge, sandpaper, or cloth in the buckets when filled with water will allow any fine dust produced during wet sanding to pass through the mesh in the bottom of the inner bucket and precipitate to the bottom. Simply remove the inner bucket to quickly and easily throw away the dirty water.
1
Open the lid
2
Pull out the inside
3
To separate the two layers
Duplex Bucket usage diagram
1
Nest the 2 bucket layers together and fill with water. Put in any sponges, sandpaper, or rags you use.
2
The inner bucket’s mesh bottom allows dirt to precipitate and pass through its holes and settle on the bottom of the outer bucket.
3
When the water becomes dirty, remove the inner bucket. The work items left inside are easily separated from the water.
4
Throw away the dirty water and rinse out the outer bucket before refilling it with clean water.
5
Put the clean inner bucket back into the outer bucket to continue using it at any time.
