Speed | 0-600/0-3500rpm |
---|---|
Voltage | 120V |
Electric current | 12A |
Wattage | 1250W |
Weight | 3kg |
Spindle screw diameter | 5/8inch |
Cord | 2.8m |
Size | L470mm |
Backing pad | Rubber part: φ170mm (Backing pad part: φ150mm) |
Custom greasing | Completed |
Standard accessories | Side handle, Loop handle |
Carbon brush | Product code 03129-35 |
- FE News»
- PPS News»
- Apr. 15, 2024
- Holiday Closing Notice [Spring 2024]
- Oct. 02, 2023
- [News Release R-1018]Compound that achieves a genuine finish Full Renewal of “KATANA” Series
- Jun. 27, 2023
- [News Release] A final finishing compound that achieves a beautiful wet gloss. "KATANA DARK-SHOT" is Released.
- May. 22, 2023
- [News Release] Full renewal of buffing pad category Brand integrated into HAYABUSA
- Apr. 12, 2023
- Announcement of Office Relocation
DEWALT DWP849X
Keeps the machine in good condition by preventing hair from wool pads, polishing powder and other contaminants from being sucked into the motor.
In addition to the standard side grip, a loop grip is also included. You can use whichever suits your working style.
The electronic speed control can be adjusted between 600 and 3,500 RPM. The dial can also be adjusted while working vertically.
The importance of greasing Original special grease
Greasing has a large impact on the lifespan of a machine, especially for parts like the gears in the head of a rotary polisher, where torque is applied. When the grease in a machine loses its effectiveness, gears wear, parts rust and heat damage and various other problems occur, leading to failure of the machine.
In particular, polishers from outside Japan tend to use low-quality grease, often causing the gears to wear out very quickly if used as is. For that reason, before selling these polishers, we have certified technicians of major US machine manufacturers (only three in Japan) replace the grease with our own special grease. After that, we inspect each part before shipping. You can use your polisher with confidence knowing that in our ten year history, there have been no cases of gear trouble caused by grease. Of course, greasing greatly extends the lifespan of Japanese polishers, too.
For polishers that do not come standard with greasing, we offer it as an optional service. We recommend requesting that service whenever purchasing a new polisher.
Power tools like polishers contain gears, bearings and other mechanical parts that invariably use grease. Although the main purpose of grease is lubrication, it also has other functions like rust protection and heat dissipation. In addition, just as there are different types of engine oil for vehicles, there are also various formulations of grease for different purposes. Despite that, most machine manufacturers use general-purpose grease.
Size