No search refinement
Cart 0 items
Quotation 0 items

Characteristics of Foam Pads

The urethane foam pad series offers a wide variety of lineups according to the condition of the painted surface, the polishing process, and the polishing compound to be used. Only high-quality ester materials with excellent chemical properties are carefully selected, and especially the filmless structure* type which has the 3D network structure, high porosity, and complete open-cell structure of the material, provides an excellent cutting and a highly uniform finish. In addition, an abrasive solvent-resistant adhesive is used for the Velcro bonded part, so it can be used repeatedly even after washing with water.

* What is filmless structure?

A special manufacturing method blows away the film-like part that remains between the foamed pores and entangles it with the fibrous urethane part, so it is stronger than conventional products, allows air to pass through well, and is stable with uniform elasticity. It is an expensive high-end material. (Excluding Polish Plus)

  • Filmless urethane foam

  • General urethane foam

    Film remains

Comparison of physical properties

  • Final Plus

    Beautiful finish with no swirling marks or holograms

    This is the softest type and effective for delicate dark colored paint. Ideal for polishing with rotary polishers, finishing with LTP and gear-driven polishers, and coating application work, etc.

    Density

    (kg/m²)

    Number of cells

    (items/25mm)

    Tensile strength

    (kg/cm²)

    Expansion rate

    (%)

    30±5 58±4 1.5≦ 200≦
  • Finish Plus

    Excellent durability and workability

    From polishing to finishing, it can be used in a wide range of combinations, such as various polishing compounds, large rotary polishers, and LTP.
    *LTP = Long Throw Polisher (a.k.a. random orbital polisher)

    Density

    (kg/m²)

    Number of cells

    (items/25mm)

    Tensile strength

    (kg/cm²)

    Expansion rate

    (%)

    30±5 50±5 1.5≦ 200≦
  • Polish Plus

    Ideal for light cutting and polishing as well as one-shot finishing of light-colored cars

    Using a material with moderate elasticity, it demonstrates excellent polishing power without applying excessive force.

    Density

    (kg/m²)

    Number of cells

    (items/25mm)

    Tensile strength

    (kg/cm²)

    Expansion rate

    (%)

    31±2 42±5 1.0≦ 200≦
  • Cut Plus

    Highly aggressive pads suitable for cutting

    The coarsest type with excellent cutting power. Suitable for cutting when not using a wool pad.

    Density

    (kg/m²)

    Number of cells

    (items/25mm)

    Tensile strength

    (kg/cm²)

    Expansion rate

    (%)

    30±5 30±4 1.0≦ 200≦

Foam Pad Product Category

NEW OPEN

Buffing pad filter search system

Find a buffing pad that you want only by choosing your desired criteria.

The new buffing pad filter search system was born from customer feedback: it is hard to find the correct product category which the specific buffing pad belongs to, and searching across multiple categories is time-consuming. Simply click on your desired criteria and the relevant buffing pads will be displayed.