・Airbrush HP-CR
| Paint feeding system | Gravity type |
|---|---|
| Nozzle mouth diameter | 0.5mm |
| Container volume | 7.0ml |
| Spray pattern | Round |
| Normal spraying pressure | 0.1-0.29Mpa |
| Operating system | Double action |
| Air intake port | 1/8" male thread (S size) |
| Note | Spanner for nozzle is included |
Compressor IS-51
| Maximum use pressure | 0.3MPa |
|---|---|
| Power | Single-phase 100VV |
| Rating power consumption | 85W（50/60Hz） |
| Compressor connecting port | 1/8" male thread (S size) |
| Mass | 2.6kg |
| Air delivery | At no load: 8.0 L/min At 0.2Mpa: 4.5 L/min |
| Noise level | 55 or lower (dB) |
| Rated time | 40 minutes |
| Size | W150×D150×H180 mm |
| Note | 4m coil hose (HPA-CH41) is included |
