| Volume | 32oz / 1gal |
|---|---|
| Fluid color | Yellow |
| Viscosity | 1 |
| pH | 7.8 |
- FE News»
- PPS News»
- Apr. 15, 2024
- Holiday Closing Notice [Spring 2024]
- Oct. 02, 2023
- [News Release R-1018]Compound that achieves a genuine finish Full Renewal of “KATANA” Series
- Jun. 27, 2023
- [News Release] A final finishing compound that achieves a beautiful wet gloss. "KATANA DARK-SHOT" is Released.
- May. 22, 2023
- [News Release] Full renewal of buffing pad category Brand integrated into HAYABUSA
- Apr. 12, 2023
- Announcement of Office Relocation
Rapid Remover
This safe film glue remover contains no organic solvents and is based on natural ingredients. It is a highly versatile product effective for films of all types. The liquid is sprayed on the entire surface of the adhesive and allowed to permeate it. Once the adhesive has began to whiten, a squeegee or similar tool is used to scrape it off. Citrus scented.
Japanese-made film removal performance: 4.5
American-made film removal performance: 4
Scent during work: 3
*This product does not use coloring. The color varies slightly between items. This is caused by one of the natural ingredients, and does not indicate any problem with the product's quality or performance.
*We are an authorized distributor of Rapid Tac. Beware of imitation products.
Japanese-made film removal performance: 4.5
American-made film removal performance: 4
Scent during work: 3
*This product does not use coloring. The color varies slightly between items. This is caused by one of the natural ingredients, and does not indicate any problem with the product's quality or performance.
*We are an authorized distributor of Rapid Tac. Beware of imitation products.
■ Japanese-made film removal performance
01 Spray the product on the adhesive surface.
02 The adhesive surface will immediately swell up.
03 After letting soak for approximately one minute, scrape the adhesive off with a squeegee.
04 The adhesive can be easily removed with one or two scrapes. The scraped-off adhesive will be in a jelly-like state. It is less sticky than when removed with a solvent.
■ American-made film removal performance
The adhesive can be easily removed with one or two scrapes, but the glue drags a little.
